Sync Your Gear to Your DAW Through the Controller
Share
From firmware 9.8.8, TRS MIDI THRU also passes MIDI clock.
What one customer wanted
A customer wanted to send the clock from Ableton Live out of the controller's TRS MIDI output, to keep a drum machine in time with Live. The controller is already connected over USB, so this setup needs no separate MIDI interface. But the clock did not come out.
Why it did not work
TRS MIDI THRU only passed notes, CC and pitch bend from the computer to the TRS output. Clock, Start and Stop reached the device but did not go out of the TRS port.
9.8.8
MIDI clock and Start, Stop and Continue now go out of the TRS port as well. We sent clock at 120 BPM and every tick came out, at the same tempo. The CC from the knobs you turn goes out on the same cable too.
We also fixed something along the way. Pitch bend from the computer went out of TRS wrong: the centre value arrived as full bend down. It now arrives exactly as sent.
How to connect it
- Connect the controller to your computer over USB, and its TRS output to the MIDI IN of your other device.
- In the Configurator, turn on TRS MIDI THRU in Global Variables.
- In Ableton Live, go to Settings > Link, Tempo & MIDI and turn on Sync for the controller's output port.
- Set your other device to follow external clock.
This works on every model with a TRS MIDI output. The 1ES2K has no TRS output.
How to update
- Download the latest ParksTool Uploader from the releases page.
- Run it, connect your device over USB, and press Auto Update.
Updating from any 9.8 version keeps your settings.